Welcome Jiangsu Haohua Industry Group Website Map

Lean Duplex 2101


LDX 2101®, DUPLEX STEEL

UNS S32101

 

Forms of LDX 2101 Available at Haohua Industry?

Sheet 
Plate 
Bar 
Welding Products 
 

LDX2101 Overview

LDX 2101 is a low-alloyed, general purpose lean duplex stainless steel. It possesses properties such as high mechanical strength, similar to that of other duplex steels, and good corrosion resistance. Compared to 300 series stainless steels, 2101 duplex stainless provides superior strength and greater chloride stress corrosion cracking resistance.

The use of manganese ensures proper ferrite-austenite phase balance, while allowing a reduction in nickel content. As a result, LDX 2101 is priced competitively with 304L and 316L stainless steels.  Due to its relatively low alloying content, it is less prone to precipitation of intermetallic phases than other duplex steels.

 

Corrosion Resistance

The corrosion resistance of LDX2101 is generally good, and therefore is suitable for use in a wide range of general-purpose applications and environments. Attributable to its duplex structure, LDX 2101 offers an excellent resistance to stress corrosion cracking. It also offers corrosion resistance comparable to 304L and 316L stainless steel, making it an excellent candidate to replace 300 series stainless in a wide variety of applications.

 

What are the characteristics of LDX 2101?

High resistance to chloride stress corrosion cracking 
Chloride pitting and crevice corrosion resistance comparable to 316L stainless 
Good general corrosion resistance 
High strength 
Good sulfide stress corrosion resistance 
Good machinability and weldability 
 

Chemical Composition, %

Cr

Ni

Mo

C

N

Mn

21.0-22.0

1.35-1.70

0.10-0.80

.040 Max

0.20-0.25

4.00-6.00

Si

P

S

Cu

Fe

 

1.00 Max

.040 Max

.030 Max

0.10-0.80

Balance

 

 

In what applications is LDX 2101 used?

Chemical process vessels, piping and heat exchangers 
General purpose stainless steel applications 
Storage Tanks 
Water treatment 
Pulp & Paper mill equipment 
Water heater tanks 
 

ASTM Specifications

Pipe Smls

Pipe Welded

Tube Smls

Tube Welded

Sheet/Plate

Bar

A790

A790

A789

A789

A240

A276

 

Mechanical Properties

Specified Tensile Properties ASTM A240
Cold Rolled Plate and Sheet > ¼”

Alloy

Ultimate Tensile Strength, ksi Minimum

.2% Yield Strength, ksi Minimum

Elongation % Minimum

Hardness Brinell Maximum

LDX 2101

94

65

30

290

304/304L

75

30

40

201

316/316L

75

30

40

217

2205

95

65

25

293

 

Mechanical Properties

Specified Tensile Properties ASTM A240
Cold Rolled Plate and Sheet ≤ ¼”

Alloy

Ultimate Tensile Strength, ksi Minimum

.2% Yield Strength, ksi Minimum

Elongation % Minimum

Hardness Brinell Maximum

LDX 2101

101

77

30

290

304/304L

75

30

40

201

316/316L

75

30

40

217

2205

95

65

25

293

LDX2101® is a registered trademark of Outokumpu Stainless.

*Note: The specifications noted including ASTM, ASME, or other applicable authorities are correct at the time of publication. Other specifications may apply for use of these materials in different applications.